Professional machine for cutting metal meshes with rebar diameter up to 12 mm and width up to 3000 mm (up to 8000 mm in maximum configuration). Cutting unit of the machine is equipped with a motorized gearbox for fast movement along the entire length of the machine.
What are features of the machine? First of all it is much cheaper in comparison with guillotine type. It is possible to make guillotine scissors of 6000 mm width, but they will be overpriced. Mesh shears with a movable carriage are versatile in terms of technical properties, because of processing mesh range from 4 to 12 mm. Mesh shears are compact in size, in particular in height and width, the length will depend on the model (3000 or 6000 mm).
How the machine works: the operator places a mesh sheet between the frame and the pressure beam. Then he fixes the L-shaped guides to the frame according to the size of the reinforcement to be cut. The guides are necessary to limit the movement of the cutter along the length of the bed. After that, the operator manually moves the mesh to the required length for cutting. The clamping device is actuated by the remote control. The moving carriage on which the cutters are mounted then moves along the bed and cuts the mesh quickly. After lifting the clamping device, the operator can move the sheet and cut again.